质量测试

QUALITY TESTING

1、盐雾测试

Salt spray test

盐 雾 检 测 按 ISO9227 进 行盐雾试验，通过抽样检 测，符合标准

Salt spray test is carried out according to ISO9227. Through sampling test, it meets the standard.

2、冲击测试Impact test

按 照 IS014120-2015 机 械安全标准进行测试，能 够承受高能量冲击

Testing according to ISO1 41 20-201 5 Mechanical Safety Standard, able t o withstand high energy impact.

3、强度测试 Strength test

焊 接 强 度 高 于 GB/ T2694.1- 2011 隔离栅焊 接点拉力标准，最小破坏 力大于 1000N

The welding strength is higher than GB/T2694.1- 2011 Standard for Tensile Force of Welding Points of Isolation Grids, and the minimum destruc tiv e f o r c e is g r e at e r t ha n 1000N.

4、喷塑层厚度测试 Spray thickness test

涂 塑 层 厚 度 符 合 GB/ T2694. 伐 0" 隔离栅涂 塑 层厚度标准，通过厚度 仪 进行抽样

涂 塑 层 按 照 标 准 GB/ T9286T998 规 定 的 方 法 进行划格实验检测

T he th i c k n e ss o f t he p l a s t i c - c o a t e d l a y e r conforms to the standard of GB/T2694.1-2011 for t h e t hi c k ne s s o f t h e plastic-coated layer of the isolation barrier, and is sampled and detected by a thickness meter.

The plastic-coated layer shall be subjec t ed t o scribing test according to the method specified in the standard GB/T9286- 1998.